LUMBAR SWITCH(for Sports Seat Type) INSPECTION

PROCEDURE


  1. INSPECT FRONT LUMBAR POWER SEAT SWITCH (for Front Passenger Side)


    1. A000R9SE01
      Text in Illustration
      *1 Hold
      *2 Release
      *a

      Component without harness connected

      (Front Lumbar Power Seat Switch)

      for LHD:

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Front Lumbar Power Seat Switch
      Tester Connection Switch Condition Specified Condition
      2 (B) - 3 (H) Hold Below 1 Ω
      4 (E) - 5 (R) Off
      3 (H) - 4 (E)
      2 (B) - 5 (R) Release

      If the result is not as specified, replace the front lumbar power seat switch.

    2. A000ORKE01
      Text in Illustration
      *1 Release
      *2 Hold
      *a

      Component without harness connected

      (Front Lumbar Power Seat Switch)

      for RHD:

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Front Lumbar Power Seat Switch
      Tester Connection Switch Condition Specified Condition
      2 (B) - 3 (H) Hold Below 1 Ω
      4 (E) - 5 (R) Off
      3 (H) - 4 (E)
      2 (B) - 5 (R) Release

      If the result is not as specified, replace the front lumbar power seat switch.