LUMBAR SWITCH(for Sports Seat Type) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY RH


    1. Use the same procedure described for the LH side Click here.

  2. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH

    Click here

  3. REMOVE FRONT SEAT CUSHION SHIELD RH

    A000SA2E01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the 2 screws.

    2. Detach the 3 claws and 2 guides.

    3. Detach the hook and remove the front seat cushion shield RH.

  4. REMOVE POWER SEAT SWITCH KNOB RH (for Slide)

    A000QEFE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using moulding remover A, detach the 4 claws and remove the power seat switch knob RH.

  5. REMOVE POWER SEAT SWITCH KNOB RH (for Reclining)

    A000OTBE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using moulding remover A, detach the 3 claws and remove the power seat switch knob RH.

  6. REMOVE FRONT POWER ADJUSTER SHIELD RH

    A000QYH

    1. Remove the 2 screws.

    2. Detach the 2 clips and remove the front power adjuster shield RH.

    3. A000Q4N

      Disconnect the 2 connectors.

    4. A000O4X

      Remove the 4 screws and switch bezel from the front power adjuster shield RH.

    5. A000SNV

      Remove the 2 clips from the front power adjuster shield RH.

  7. REMOVE POWER SEAT SWITCH ASSEMBLY

    Click here

  8. REMOVE FRONT LUMBAR POWER SEAT SWITCH

    A000P82E03
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 4 claws and remove the front lumbar power seat switch.

      Tech Tips

      Tape the screwdriver tip before use.