CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
INSTALL POWER SEAT SWITCH ASSEMBLY
Attach the 2 claws to install the power seat switch assembly to the switch bezel.
Install the 3 nuts and 3 screws.
INSTALL FRONT POWER ADJUSTER SHIELD LH
INSTALL POWER SEAT SWITCH KNOB LH (for Reclining)
INSTALL POWER SEAT SWITCH KNOB LH (for Slide)
INSTALL FRONT SEAT CUSHION SHIELD LH
INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH
INSTALL FRONT SEAT ASSEMBLY
CHECK SRS WARNING LIGHT
INSPECT SEAT BELT WARNING SYSTEM
PERFORM INITIALIZATION (w/ Memory)
Note
Under any of the following conditions, perform initialization of the position control ECU assembly.
for LHD: Click here
for RHD: Click here
The power seat switch assembly is replaced.
The power seat motor assembly is inspected or replaced.
The front seat adjuster is inspected or replaced.
INSPECT POWER SEAT CONTROL SYSTEM
for LHD: Click here
for RHD: Click here
INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)
INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)
ENABLE AUTOAWAY/RETURN FUNCTION
Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.