POWER SEAT SWITCH(w/ Shoulder Switch) INSPECTION

PROCEDURE


  1. INSPECT FRONT POWER SEAT SWITCH ASSEMBLY RH (for LHD)


    1. A000NWKE01
      Text in Illustration
      *1 Reclining Switch
      *2 Slide Switch
      *a

      Component without harness connected

      (Front Power Seat Switch Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Reclining Switch
      Tester Connection Switch Condition Specified Condition
      4 (RCLF) - 3 (B) Front Below 1 Ω
      5 (RCLR) - 3 (B) Rear
      Standard resistance
      Slide Switch
      Tester Connection Switch Condition Specified Condition
      2 (SLDF) - 3 (B) Front Below 1 Ω
      1 (SLDR) - 3 (B) Rear

      If the result is not as specified, replace the front power seat switch assembly RH.

  2. INSPECT FRONT POWER SEAT SWITCH ASSEMBLY LH (for RHD)


    1. A000SEAE01
      Text in Illustration
      *1 Reclining Switch
      *2 Slide Switch
      *a

      Component without harness connected

      (Front Power Seat Switch Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Reclining Switch
      Tester Connection Switch Condition Specified Condition
      2 (RCLF) - 3 (B) Front Below 1 Ω
      1 (RCLR) - 3 (B) Rear
      Standard resistance
      Slide Switch
      Tester Connection Switch Condition Specified Condition
      4 (SLDF) - 3 (B) Front Below 1 Ω
      5 (SLDR) - 3 (B) Rear

      If the result is not as specified, replace the front power seat switch assembly LH.