POWER SEAT SWITCH(w/ Shoulder Switch) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY RH


    1. Use the same procedure described for the LH side Click here.

  2. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY RH

    A000O9R

    1. Using a clip remover, remove the clip and disconnect the rubber band.

    2. Detach the hook and disconnect the rubber band.

    3. Using a clip remover, remove the clip.

    4. A000Q3D

      Open the lower part of the front seatback board sub-assembly RH and remove the 2 screws.

    5. Push and slide the front seatback board subassembly LH to detach the claw.

      Tech Tips

      Use the same procedure to detach the claw on the other side.

    6. Slide the front seatback board sub-assembly RH downward to detach the 2 hooks and remove it.

  3. REMOVE FRONT SEATBACK BOARD


    1. A000RJ6

      Remove the 2 screws.

    2. Slide the front seatback board downward to detach the 2 hooks and remove it.

  4. REMOVE FRONT POWER SEAT SWITCH ASSEMBLY RH


    1. A000T4J

      Detach the wire harness clamp.

    2. A000PB0E01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape as shown in the illustration.

    3. Using moulding remover A, detach the 2 claws and remove the front power seat switch assembly RH.

    4. A000Q6Q

      Disconnect the connector.