PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSPECTION

PROCEDURE


  1. INSPECT SKID CONTROL BUZZER ASSEMBLY (PRE-CRASH SAFETY SYSTEM WARNING BUZZER)


    1. A000NPNE04
      Text in Illustration
      *a

      Component without harness connected

      (Skid Control Buzzer (Pre-crash Safety System Warning Buzzer))

      Apply battery voltage and check the operation of the skid control buzzer (pre-crash safety system warning buzzer) according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2 (IG1)

      Battery negative (-) → Terminal 1 (BZ)

      		 Skid control buzzer (pre-crash safety system warning buzzer) sounds

      If the result is not as specified, replace the skid control buzzer (pre-crash safety system warning buzzer).