REAR SEAT SIDE AIRBAG ASSEMBLY ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the rear seat airbag assemblies.

PROCEDURE


  1. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check Click here.

    2. Visually check for defects with the rear seat airbag assemblies installed on the vehicle.


      1. The defects are as follows:


        • Cuts on the rear seat airbag assemblies

        • Small cracks on the rear seat airbag assemblies

        • Significant discoloration on the rear seat airbag assemblies

        OK
        No defects are found.

        Tech Tips

        If any of the defects is found, replace the rear seat airbag assembly with a new one.

  2. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


    1. Perform a diagnostic system check Click here.

    2. Visually check for defects with the rear seat airbag assemblies removed from the vehicle.


      1. The defects are as follows:


        • Cuts on the rear seat airbag assemblies

        • Small cracks on the rear seat airbag assemblies

        • Significant discoloration on the rear seat airbag assemblies

        • Cracks or other damage to the wire harness or connector

        • Deformation on the installation part of the rear seat airbag assemblies

        OK
        No defects are found.

        Tech Tips

        If any of the defects is found, replace the rear seat airbag assembly with a new one.