METER / GAUGE SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA


    1. Whenever a meter DTC is stored, the meter CPU stores the current vehicle state as Freeze Frame Data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.

    5. According to the GTS display, select the trouble code data display with Freeze Frame Data.

      Combination Meter
      Tester Display Condition Reference Value
      B1507 Open in Turn Signal Circuit

      • Trip

      • Elapsed time after turning the power switch on (IG)
      B1508 Short in Turn Signal/Hazard Flasher Circuit
      B150A Lost Communication with HMI-LAN
      B150B Lost Communication with Gigabit Video Interface
      U0100 Lost Communication with ECM/PCM "A"
      U0129 Lost Communication with Brake System Control Module
      U0130 Lost Communication with VGRS
      U0131 Lost Communication with Power Steering Control Module
      U0134 Lost Communication with DRS Module
      U0142 Lost Communication with Body Control Module "B"
      U0151 Lost Communication with Restraints Control Module
      U0163 Lost Communication With Navigation Control Module
      U0182 Lost Communication with Lighting Control Module Front
      U023A Lost Communication with Front Camera Module
      U1104 Lost Communication with Driving Support ECU

  3. CLEAR FREEZE FRAME DATA

    Note

    Clearing the DTC will also clear the Freeze Frame Data.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Clear the DTC and Freeze Frame Data Click here.