PERSONAL LIGHT INSPECTION

PROCEDURE

1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY

   

   Text in Illustration

   *a	Component without harness connected (No. 1 Interior Illumination Light Assembly)

   
   

   1. Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 (B) Auxiliary battery negative (-) → Terminal 1 (E) Illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly.

2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

   

   Text in Illustration

   *a	Component without harness connected (No. 1 Interior Illumination Light Assembly RH)

   
   

   1. Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal 2 (B) Auxiliary battery negative (-) → Terminal 1 (E) Illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly RH.