ENGINE HOOD COURTESY SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A000RD2

      Disconnect the connector and remove the 2 clamps.

    2. Detach the 2 clips and remove the hood lock control cable cover.

  4. REMOVE HOOD LOCK ASSEMBLY


    1. A000QQT

      Remove the 3 bolts and disconnect the hood lock assembly from the upper radiator support sub-assembly.

    2. A000MYP

      Move the hood lock assembly as shown in the illustration to remove it from the upper radiator support.

    3. A000NAL

      Disconnect the hood lock control cable and remove the hood lock assembly.

      Note

      Do not excessively bend the hood lock control cable assembly.