DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| ACC SW | Power switch / ON or OFF | ON: Power switch on (ACC) OFF: Power switch off |
"ON" is also displayed for this item when the power switch is on (IG). |
| IG SW | Power switch / ON or OFF | ON: Power switch on (IG) OFF: Power switch off or on (ACC) |
"OFF" is also displayed for this item when the power switch is on (ACC). |
| RR Door Courtesy SW | Rear door courtesy light switch RH / ON or OFF | ON: Rear door RH open OFF: Rear door RH closed |
- |
| RL Door Courtesy SW | Rear door courtesy light switch LH / ON or OFF | ON: Rear door LH open OFF: Rear door LH closed |
- |
| FR Door Lock Pos | Front door RH unlock detection switch / LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy | Front door courtesy light switch RH / ON or OFF | ON: Front door RH open OFF: Front door RH closed |
- |
| FL Door Lock Pos | Front door LH unlock detection switch / LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy | Front door courtesy light switch LH / ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
| Hood Courtesy SW | Engine hood courtesy switch / ON or OFF | ON: Engine hood open OFF: Engine hood closed |
- |
| RR-Door Lock Pos SW | Rear door RH unlock detection switch / ON or OFF | ON: Rear door RH unlocked OFF: Rear door RH locked |
- |
| RL-Door Lock Pos SW | Rear door LH unlock detection switch / ON or OFF | ON: Rear door LH unlocked OFF: Rear door LH locked |
- |
| Intrusion Sens OFF SW*1 | Intrusion sensor cancel switch / ON or OFF | ON: Intrusion sensor cancel switch on OFF: Intrusion sensor cancel switch off |
- |
| Intrusion Sensor*1 | Status of the intrusion sensor detection / ON or OFF | ON: Intrusion sensor detected OFF: Intrusion sensor not detected |
- |
| Tilt Sensor*2 | Status of the tilt sensor detection / ON or OFF | ON: Tilt sensor detected OFF: Tilt sensor not detected |
- |
| Intrusion Sen Conn*1 | Intrusion sensor connecting / ON or OFF | ON: Intrusion sensor connected OFF: Intrusion sensor not connected |
- |
| Tilt Sensor Connect*2 | Tilt sensor connecting / ON or OFF | ON: Tilt sensor connected OFF: Tilt sensor not connected |
- |
| Intrusion Sensor Sound Detect*1*3*6 | Sound detection status of the intrusion sensor (theft warning ultrasonic sensor) / ON or OFF | ON: Sound detected OFF: Sound not detected |
Only displays "ON" on the Data List once. When checking again, disconnect and reconnect the GTS. |
| Intrusion Win Opened*1 | Setting of the customized item "Intrusion Win Opened" / ON or OFF | Customized value displayed | - |
| Security control with mechanism key*4 | Setting of the customized item "Security control with mechanism key" / ON or OFF | Customized value displayed | - |
| Intrusion Sensor Sound Detection Function*1*3 | Setting of the customized item "Intrusion Sensor Sound Detection Function" / ON or OFF | Customized value displayed | - |
| Intrusion Sensor Sensitivity Level*1 | Setting of the customized item "Intrusion Sensor Sensitivity Level" / Low or Normal | Customized value displayed | - |
| The Number of DTC | Number of DTCs / 0 to 255 | Number of DTCs will be displayed | - |
*1: w/ Intrusion Sensor
*2: w/ Tilt Sensor
*3: w/o Door Ajar Warning Buzzer Function
*4: Vehicles displaying the item "Security control with mechanism key" on the GTS
*5: Although the item is displayed on the GTS, it is not applicable to this vehicle.
Note
*6: Perform the intrusion sensor operation inspection with the GTS disconnected Click here.
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry & Start / Active Test.
According to the display on the GTS, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Horn2*1 | Theft warning siren | OFF/ON | - |
| Vehicle Horn | Vehicle horns | OFF/ON | - |
| Security Horn*4 | Security horn | OFF/ON | - |
| Power for Intrusion sensor*2 | Intrusion sensor power supply | OFF/ON | - |
| Power for Tilt sensor*3 | Tilt sensor power supply | OFF/ON | - |
*1: w/ Theft Warning Siren
*2: w/ Intrusion Sensor
*3: w/ Tilt Sensor
*4: w/ Security Horn Assembly
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Immobiliser Indicator | Security indicator light | OFF/ON | - |