TRANSMITTER BATTERY REPLACEMENT

PROCEDURE


  1. REPLACE TRANSMITTER BATTERY (for Standard, for Type A)

    Note

    Take extra care when handling these precision electronic components.


    1. A000PUQ

      Push and hold the release knob in the direction indicated by the arrow in the illustration. Then take the mechanical key out of the case.

    2. A000NJOE01
      Text in Illustration
      *1 Protective Tape

      Insert a screwdriverr, into the gap and turn the screwdriver to detach the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A000N88E01
      Text in Illustration
      *1 Protective Tape

      Insert a screwdriver, into the gap and remove the battery (lithium battery: CR2032).

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may be damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

    4. A000SPT

      Install a battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not bend the electrodes while installing the battery.

      • Keep the interior of the transmitter case free of dust, water and oil.

    5. A000T76

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    6. Insert the mechanical key into the transmitter.

    7. Press one of the transmitter switches and check that the LED illuminates.

  2. REPLACE TRANSMITTER BATTERY (for Standard, for Type B)

    Note

    Take extra care when handling these precision electronic components.


    1. A000QSC

      Push and hold the release knob in the direction indicated by the arrow in the illustration. Then take the mechanical key out of the case.

    2. A000RPOE01
      Text in Illustration
      *1 Protective Tape

      Insert a screwdriver, into the gap and turn the screwdriver to detach the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A000R1T

      Detach the 2 claws and remove the transmitter battery housing cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    4. A000PZSE01
      Text in Illustration
      *1 Protective Tape

      Insert a screwdriver, into the gap and remove the battery (lithium battery: CR2032).

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may be damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

    5. A000SLL

      Install a battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Do not bend the electrodes while installing the battery.

      • Keep the interior of the transmitter case free of dust, water and oil.

    6. Attach the 2 claws to install the transmitter battery housing cover.

    7. A000OH0

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    8. Insert the mechanical key into the transmitter.

    9. Press one of the transmitter switches and check that the LED illuminates.

  3. REPLACE TRANSMITTER (CARD KEY) BATTERY (for Card Type)


    1. A000NIX

      Lightly hold and pull the battery cover out in the direction indicated by the arrow in the illustration.

      Note

      Do not insert a screwdriver, etc. between the case and battery cover and forcefully bend the battery cover. This will deform the battery cover.

      Tech Tips


      • If the battery cover is held too firmly, it becomes harder to pull out.

      • If the cover is slippery and it is difficult to pull it out, use non-slip gloves to pull the cover out.

    2. A000T4O

      Remove the transmitter battery (lithium battery: CR2412).

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    3. A000QAR

      Push in and install the transmitter battery (lithium battery (CR2412)) while being careful of the following: 1) the orientation of the battery positive (+) and negative (-) terminals; and 2) being sure to insert the battery between the 2 terminals and deep into the card in the direction indicated by the arrow in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      • Insert the battery so that its positive (+) side is facing the LEXUS mark.

      • Do not deform the terminals.

      • If the terminals are dirty, wipe the terminals with a soft cloth before installing the battery.

      Tech Tips

      Check if the card terminals are damaged or if the card interior has foreign matter.

    4. A000MVG

      Install the battery cover so that it clips onto the case.

      Note


      • Push on the battery cover until its attachment hooks attach securely.

      • When the battery cover is removed and installed many times, be careful as the cover may become loose.