DOOR CONTROL SWITCH INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (DOOR CONTROL SWITCH)


    1. Removal the power window regulator switch assembly Click here.

    2. A000T31E04
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly (Door Control Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      7 (UL) - 5 (GND) Unlock Below 1 Ω

      7 (UL) - 5 (GND)

      12 (L) - 5 (GND)

      		 Off 10 kΩ or higher
      12 (L) - 5 (GND) Lock Below 1 Ω

      If the result is not as specified, replace the power window regulator switch assembly.

    3. Install the power window regulator switch assembly Click here.