BLIND SPOT MONITOR SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note


  • Avoid any impact to the blind spot monitor sensor.

  • Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.

PROCEDURE


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH


    1. Disconnect the connector.

    2. A000SKV

      Remove the 3 nuts and remove the blind spot monitor sensor LH.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH


    1. Disconnect the connector.

    2. A000MY8

      Remove the 3 nuts and remove the blind spot monitor sensor RH.