BLIND SPOT MONITOR SYSTEM DIAGNOSTIC TROUBLE CODE CHART

Tech Tips

If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.

Blind Spot Monitor System
DTC Code Detection Item See page
C1A45 Vehicle Speed Sensor

Click here

C1A47 Steering Angle Sensor

Click here

C1AB0 Short to +B in Outer Mirror Indicator(Master)

Click here

C1AB1 Short to +B in Outer Mirror Indicator(Slave)

Click here

C1AB2 Short to GND in Outer Mirror Indicator(Master)

Click here

C1AB3 Short to GND in Outer Mirror Indicator(Slave)

Click here

C1AB4 Open in Outer Mirror Indicator(Master)

Click here

C1AB5 Open in Outer Mirror Indicator(Slave)

Click here

C1AB6 Blind Spot Monitor Master Module

Click here

C1AB7 Blind Spot Monitor Slave Module

Click here

C1AB8 Destination Information Undefined

Click here

C1ABB Blind Spot Monitor Master Module Beam Axis Inspection Incomplete

Click here

C1ABC Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete

Click here

C1ABD Short to +B in Buzzer

Click here

C1ABE Short to GND or Open in Buzzer

Click here

C1AC1 Master Module Horizontal Axis Misalignment

Click here

C1AC2 Slave Module Horizontal Axis Misalignment

Click here

U0126 Lost Communication with Steering Angle Sensor Module

Click here

U0129 Lost Communication with Brake System Control Module

Click here

U0142 Lost Communication with Body Control Module "B"

Click here

U0232 Lost Communication with Blind Spot Monitor Slave Module

Click here

U0293 Lost Communication with HV ECU

Click here

U1331 Software Incompatibility with Body Control Module "B"

Click here