Tech Tips
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
| DTC Code | Detection Item | See page |
|---|---|---|
| C1A45 | Vehicle Speed Sensor | |
| C1A47 | Steering Angle Sensor | |
| C1AB0 | Short to +B in Outer Mirror Indicator(Master) | |
| C1AB1 | Short to +B in Outer Mirror Indicator(Slave) | |
| C1AB2 | Short to GND in Outer Mirror Indicator(Master) | |
| C1AB3 | Short to GND in Outer Mirror Indicator(Slave) | |
| C1AB4 | Open in Outer Mirror Indicator(Master) | |
| C1AB5 | Open in Outer Mirror Indicator(Slave) | |
| C1AB6 | Blind Spot Monitor Master Module | |
| C1AB7 | Blind Spot Monitor Slave Module | |
| C1AB8 | Destination Information Undefined | |
| C1ABB | Blind Spot Monitor Master Module Beam Axis Inspection Incomplete | |
| C1ABC | Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete | |
| C1ABD | Short to +B in Buzzer | |
| C1ABE | Short to GND or Open in Buzzer | |
| C1AC1 | Master Module Horizontal Axis Misalignment | |
| C1AC2 | Slave Module Horizontal Axis Misalignment | |
| U0126 | Lost Communication with Steering Angle Sensor Module | |
| U0129 | Lost Communication with Brake System Control Module | |
| U0142 | Lost Communication with Body Control Module "B" | |
| U0232 | Lost Communication with Blind Spot Monitor Slave Module | |
| U0293 | Lost Communication with HV ECU | |
| U1331 | Software Incompatibility with Body Control Module "B" |