TELEMATICS SYSTEM(w/ Telematics Transceiver) TERMINALS OF ECU

Tech Tips

Check from the rear of the connector while it is connected to the components.


  1. TELEMATICS TRANSCEIVER

    A000OBCE02
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N169-1 (+B) - N169-4 (E) B - W-B Power source (+B) Power switch off 11 to 14 V
    N169-2 (SPI+) - N169-4 (E) LG - W-B Sound signal Audio system playing A waveform synchronized with sound is output
    N169-3 (SPI-) - N169-4 (E) L - W-B Sound signal Audio system playing A waveform synchronized with sound is output
    N169-4 (E) - Body ground W-B - Body ground Ground Always Below 1 V
    N169-5 (SPO+) - N169-4 (E) R - W-B Sound signal Emergency call mode A waveform synchronized with the received voice is output
    N169-6 (SPO-) - N169-4 (E) P - W-B Sound signal Emergency call mode A waveform synchronized with the received voice is output
    N169-7 (IG2) - N169-4 (E) B - W-B Power source (IG) Power switch on (IG) 11 to 14 V
    Power switch off Below 1 V
    N169-8 (ACC) - N169-4 (E) L - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V
    N169-9 (SLED) - N169-4 (E) P - W-B Emergency call switch illumination signal Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V
    N169-11 (IND1) - N169-4 (E) B - W-B Emergency call switch red indicator illumination signal For 5 seconds after turning the power switch on (ACC) 1 to 8.5 V
    Power switch off Below 1 V
    N169-12 (IND2) - N169-4 (E) LG - W-B Emergency call switch green indicator illumination signal For 5 seconds after turning the power switch on (ACC) 1 to 8.5 V
    Power switch off Below 1 V
    N169-15 (CANP) B CAN communication signal - -
    N169-16 (CANN) W CAN communication signal - -
    N169-17 (MUTE) - N169-4 (E) Y - W-B Mute Signal Audio system playing Above 3.5 V
    Emergency call mode Below 1 V
    N169-18 (MCO+) - N169-4 (E) B - W-B Microphone voice signal

    Refer to "Microphone Check" Click here

    		-
    N169-19 (MCO-) - N169-4 (E) W - W-B Microphone voice signal

    Refer to "Microphone Check" Click here

    		-
    N169-24 (GSW) - N169-4 (E) W - W-B Airbag deployment signal Power switch on (IG)

    Pulse generation

    (Refer to waveform 1)
    N169-26 (SIG-) - N169-4 (E) Y - W-B Ground Always Below 1 V
    N169-27 (SIG1) - N169-26 (SIG-) L - Y Emergency call switch button condition signal Emergency call switch not pressed 1.3 to 1.9 V
    Emergency call switch pressed 0.5 to 0.8 V
    N169-32 (SGND) - N169-4 (E) Shielded - W-B Shield ground Always Below 1 V
    N169-33 (MCVD) - N169-4 (E) B - W-B Telephone microphone assembly power supply Power switch on (ACC) 4 to 6 V
    Power switch off Below 1 V
    N169-34 (MCI+) - N169-4 (E) W - W-B Microphone voice signal

    Refer to "Microphone Check" Click here

    		-
    N169-35 (MCI-) - N169-4 (E) R - W-B Microphone voice signal

    Refer to "Microphone Check" Click here

    		-
    N146-1-1 (USB-) B USB communication line - -
    N146-1-2 (USB+) B USB communication line - -
    N146-1-3 (USBS) - Body ground Shielded - Body ground Shield ground Always Below 1 V
    N146-2 (USBG) - Body ground W - Body ground Shield ground Always Below 1 V
    N146-3 (VOT+) - N169-4 (E) G - W-B Receive voice signal Receiving a call while using the operator service A waveform synchronized with the received voice is output
    N146-4 (USBV) - N169-4 (E) W - W-B Telephone microphone assembly power supply Power switch on (ACC) 4.75 to 5.25 V
    Power switch off Below 1 V
    N146-5 (VOT-) - N169-4 (E) B - W-B Receive voice signal Receiving a call while using the operator service A waveform synchronized with the received voice is output
    N146-6 (VOR-) - N169-4 (E) R - W-B Sent voice signal Calling while using the operator service A waveform synchronized with the sent voice is output
    N146-7 (VOR+) - N169-4 (E) W - W-B Sent voice signal Calling while using the operator service A waveform synchronized with the sent voice is output

    1. Reference (Oscilloscope waveform):


      1. A000OIEE18

        Waveform 1

        Item Condition
        Tester Connection N169-24 (GSW) - N169-4 (E)
        Tool setting 5.0 V/DIV., 20 ms/DIV.
        Vehicle condition Power switch on (IG)

  2. MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here