NAVIGATION ANTENNA REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Click here

  7. REMOVE NO. 3 HEATER TO REGISTER DUCT

    Click here

  8. REMOVE NAVIGATION ANTENNA ASSEMBLY (for LHD)


    1. Detach the 4 clamps.

      A000NWD

    2. Remove the 2 screws remove the navigation antenna.

  9. REMOVE NO. 1 HEATER TO REGISTER DUCT (for RHD)

    Click here

  10. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT (for RHD)

    Click here

  11. REMOVE DEFROSTER NOZZLE ASSEMBLY (for RHD)

    Click here

  12. REMOVE NAVIGATION ANTENNA ASSEMBLY (for RHD)


    1. Detach the 5 clamps.

      A000RD3

    2. Remove the 2 screws remove the navigation antenna.