REMOTE TOUCH REASSEMBLY

PROCEDURE

1. INSTALL RH COVER ASSEMBLY

   
   

   1. Attach the 4 claws to install the 2 switches.

      Tech Tips

      A switch hole cover is installed if there is no switch.

2. INSTALL INTEGRATION PANEL SUB-ASSEMBLY

   
   

   1. Install the integration panel sub-assembly with the 6 screws.

3. INSTALL REMOTE OPERATION BOARD

   
   

   1. Connect the connector.

   2. Install the remote operation board with the 4 screws.

4. INSTALL SWITCH KNOB

   
   

   1. Push on the switch knob to install it.

      Tech Tips

      Make sure the orientation of the switch knob is correct when installing it.

5. INSTALL COVER

   
   

   1. Attach the 2 clips to install the cover.