NAVIGATION SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZING WITH ACCESSORY METER ASSEMBLY (for 12.3 Inch) or MULTI-DISPLAY (for 8 Inch)

   
   

   1. Turn the power switch on (IG).

   2. Using the accessory meter assembly (for 12.3 Inch) or multi-display (for 8 Inch), select "Setup", "General", and then "Feedback Force" and change the customize setting.

      Display	Default	Content	Setting	Relevant ECU
      Feedback Force	3 (middle bar)	Feedback force setting of the remote touch*	1, 2, 3, 4 or 5	Multi-media module receiver assembly
      			LEVEL1/LEVEL2/ LEVEL3/LEVEL4/LEVEL5

      Tech Tips

      *: The higher the set value, the stronger the remote touch feedback force becomes.