INSTRUMENT PANEL SPEAKER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  6. REMOVE FRONT DOOR OPENING TRIM COVER LH

    Click here

  7. REMOVE FRONT PILLAR GARNISH LH

    Click here

  8. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

    Click here

  9. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


    1. Remove the 2 screws.

    2. Lift up the front No. 2 speaker assembly, disconnect the connector on the back of the speaker and remove the speaker.

      A000OO6E01
      Text in Illustration
      *A w/o Mark Levinson Speaker System *B w/ Mark Levinson Speaker System

      Note

      Do not touch the cone of the speaker.

      Tech Tips


      • Use the same procedure for the RH and LH sides.

      • The procedure listed above is for the LH side.

  10. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  11. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY


    1. A000PT4

      Remove the 2 screws.

    2. Lift up the front No. 3 speaker assembly, disconnect the connector on the back of the speaker and remove the speaker.

      Note

      Do not touch the cone of the speaker.