FRONT DOOR SPEAKER INSPECTION

PROCEDURE

1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

   
   

   1. w/o Mark Levinson Speaker System:

      
      
      1. 

         Text in Illustration

         *a	Component without harness connected (Front No. 1 Speaker Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 Always 4 Ω

         If the result is not as specified, replace the front No. 1 speaker assembly.

   2. w/ Mark Levinson Speaker System:

      
      
      1. 

         Text in Illustration

         *a	Component without harness connected (Front No. 1 Speaker Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 Always 5.2 Ω

         If the result is not as specified, replace the front No. 1 speaker assembly.