STEREO COMPONENT AMPLIFIER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER RH

    Click here

  6. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET


    1. Disconnect all the connectors.

    2. Remove the 3 nuts and stereo component amplifier assembly with bracket.

      A000ORJE01
      Text in Illustration
      *A w/ Mark Levinson Speaker System *B w/o Mark Levinson Speaker System

  7. REMOVE NO. 1 AMPLIFIER BRACKET


    1. A000P5KE01
      Text in Illustration
      *A w/o Mark Levinson Speaker System
      *B w/ Mark Levinson Speaker System

      Remove the 2 screws and No. 1 amplifier bracket.

  8. REMOVE NO. 2 AMPLIFIER BRACKET


    1. A000RCIE01
      Text in Illustration
      *A w/ Mark Levinson Speaker System
      *B w/o Mark Levinson Speaker System

      Remove the 2 screws and No. 2 amplifier bracket.