TILT AND TELESCOPIC MANUAL SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  5. REMOVE STEERING COLUMN COVER


    1. A000PJW

      Remove the 2 screws.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to remove the 2 screws.

    2. A000SP9E01
      *1 Push Area

      Remove the screw and while pressing the push area shown in the illustration to detach the claws, slightly lower steering column cover.

      Note

      Do not damage the tilt and telescopic switch.

  6. REMOVE TILT AND TELESCOPIC SWITCH


    1. A000NZD

      Disconnect the connector.

    2. Detach the claw and pull out the tilt and telescopic switch.