STEERING WHEEL INSTALLATION

PROCEDURE


  1. INSTALL STEERING WHEEL BOSS LOWER COVER


    1. Install the lower steering boss cover with the 2 claws and screw.

  2. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY

    Click here

  3. INSTALL LOWER NO. 1 STEERING WHEEL BOSS COVER

    Click here

  4. INSTALL CRUISE CONTROL MAIN SWITCH

    Click here

  5. INSTALL STEERING PAD SWITCH ASSEMBLY

    Click here

  6. ADJUST SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

    Click here

  7. INSTALL STEERING WHEEL ASSEMBLY


    1. B002BVYE02
      Text in Illustration
      *a Matchmark

      Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

    2. Install the steering wheel assembly set nut.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  8. INSTALL STEERING PAD

    Click here

  9. CHECK FRONT WHEELS FACING STRAIGHT AHEAD

  10. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION (w/ VGRS)

    Click here

  11. PERFORM INITIALIZATION (w/ VGRS)

    Click here