VARIABLE GEAR RATIO STEERING SYSTEM, Diagnostic DTC:C15B4/71

DTC Code DTC Name
C15B4/71 ECU Malfunction(Actuator Angle Record)

DESCRIPTION

If the VGRS ECU (front steering control ECU) detects an internal malfunction, it turns the master warning light on, stores DTC C15B4/71 and stops VGRS operation.

DTC Code DTC Detection Condition Trouble Area
C15B4/71 The memorized actuator angle value cannot be confirmed immediately after the power switch is turned on (IG). VGRS ECU (front steering control ECU)

CAUTION / NOTICE / HINT

Note


  • When replacing the VGRS ECU (front steering control ECU), perform actuator angle neutral position calibration and initialization after replacement Click here.

  • Since DTC C1B09/19 is stored in the DRS ECU (rear steering control ECU), after performing repairs on the VGRS system, clear the DTCs for the dynamic rear steering system.

  • When DTC C15B4/71 is output, confirm the following:


    • Whether the master warning light illuminated while the vehicle was being driven.

PROCEDURE


  1. PERFORM VGRS SYSTEM CALIBRATION


    1. Perform VGRS system calibration Click here.

      Result
      Result Proceed to
      Actuator angle neutral position calibration can be performed A
      Actuator angle neutral position calibration cannot be performed B

    A

    END

    B

    REPLACE FRONT STEERING CONTROL ECU Click here