POWER STEERING ECU REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. DISCONNECT CABLE FROM AUXILIARY BATTERY TERMINAL

    Click here

  5. REMOVE INVERTER ASSEMBLY WITH CONVERTER

    for 2GR-FXE
    (See page Click here)
    for 2AR-FSE
    (See page Click here)

  6. REMOVE POWER STEERING ECU ASSEMBLY


    1. A000R2N

      Remove the 2 bolts.

    2. A000PA9

      Disconnect the 3 connectors from the power steering ECU.

      Tech Tips

      Detach the 2 claws, press down the 2 levers, and then disconnect the 2 connectors.