ELECTRIC PARKING BRAKE SWITCH INSPECTION

PROCEDURE


  1. INSPECT ELECTRIC PARKING BRAKE SWITCH ASSEMBLY


    1. A000Q37E03
      Text in Illustration
      *a Pulled (Release)
      *b Pushed (Lock)
      *c Neutral
      *d

      Component without harness connected

      (Electric Parking Brake Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      6 (LOK1) - 7 (GND1) Pulled (Release) 97.09 to 107.31 kΩ
      Pushed (Lock) 2.09 to 2.31 kΩ
      Neutral 97.09 to 107.31 kΩ
      8 (LOK2) - 7 (GND1) Pulled (Release) 5.51 to 6.09 kΩ
      Pushed (Lock) 1.045 to 1.155 kΩ
      Neutral 5.51 to 6.09 kΩ
      5 (RLS1) - 7 (GND1) Pulled (Release) 1.045 to 1.155 kΩ
      Pushed (Lock) 5.51 to 6.09 kΩ
      Neutral 5.51 to 6.09 kΩ
      4 (RLS2) - 7 (GND1) Pulled (Release) 1.045 to 1.155 kΩ
      Pushed (Lock) 5.51 to 6.09 kΩ
      Neutral 5.51 to 6.09 kΩ

      If the result is not as specified, replace the electric parking brake switch assembly.

  2. INSPECT PARKING LIGHT SWITCH ASSEMBLY


    1. A000MZ8E01
      Text in Illustration
      *a

      Component without harness connected

      (Parking Light Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (AUTO) - 5 (GND2) Pushed Below 1 Ω
      Not pushed 10 kΩ or higher

      If the result is not as specified, replace the parking light switch assembly.