BRAKE LINE PRECAUTION


  1. TROUBLESHOOTING PRECAUTION

    Note


    • Since the brake lines are classified as critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.

    • When removing brake components, cover the brake line connections to prevent foreign matter, such as dust or dirt, from entering the lines.

    • Do not damage or deform the brake lines when removing or installing them.

    • Do not deform the bracket and the body when connecting a brake line and flexible hose.

    • When installing a brake tube grommet to the body, make sure that the brake line passes through the center of the grommet.

    • When installing a brake line or flexible hose, make sure that it is free from twists or bends.

    • If the cap of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.

    • Flexible hoses must be free from shock absorber oil, grease, etc.

    • When installing a brake line to a plastic clamp, make sure that the brake line is not loose or pinched.

    • Do not reuse any clips or plastic clamps removed from a flexible hose or brake line.

    • After installing a brake line or flexible hose, make sure that it does not interfere with any other components.

    • Do not allow brake fluid to adhere to any painted surface such as the vehicle body. If brake fluid leaks onto any painted surface, immediately wash it off.

    • A000SXYE44

      When disconnecting and connecting a flexible hose and brake line:

      Text in Illustration
      *a Disconnecting
      *b Connecting

      1. Hold the flexible hose with a wrench and disconnect the brake line with a union nut wrench without deforming the line.

      2. Remove the clip.

      3. Install a new clip.

      4. Hold the flexible hose with a wrench and connect the brake line with a union nut wrench without deforming the line.

    • A000PRR

      When connecting a brake line and 2-way:


      1. Support the 2-way to prevent deformation of the brake tube and connect the brake tube to the 2-way with a union nut wrench.

      2. Support the 2-way to prevent deformation of the brake tube and install the bolt to fix the 2-way to the body.