BRAKE ACTUATOR DISPOSAL

PROCEDURE


  1. DISPOSE OF BRAKE ACCUMULATOR PUMP


    1. A000QKGE01
      Text in Illustration
      *a Caution Label

      Using a drill, slowly drill a hole approximately 10 mm deep at the base of the caution label indicated by the shaded area A in the illustration to discharge the gas inside.

      Tech Tips


      • Drill the hole within 5 to 10 mm (0.197 in. to 0.394 in.) from the base of the caution label indicated by the shaded area A in the illustration.

      • Nitrogen gas, which is colorless, odorless and harmless, will be discharged.

      CAUTION:

      Wear eye protection for this procedure as metal shards may become airborne when pressurized gas is discharged.