BRAKE STROKE SIMULATOR CYLINDER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD and LHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

    Click here

  2. REMOVE BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY


    1. A000R70

      Using a union nut wrench, disconnect the brake stroke simulator tube.

    2. A000Q1J

      Remove the 2 bolts and brake stroke simulator cylinder assembly from the brake master cylinder sub-assembly.