GRILLE SHUTTER REASSEMBLY

PROCEDURE


  1. INSTALL RADIATOR SIDE AIR SEAL LH

    Tech Tips

    When installing the radiator side air seal, heat the radiator shutter and radiator side air seal using a heat light.

    Standard
    Item Temperature
    Radiator Shutter 20 to 30°C (68 to 86°F)

    Note

    Do not heat the radiator shutter excessively.


    1. Clean the radiator shutter surface.


      1. Using a heat light, heat the radiator shutter surface.

      2. Remove the double-sided tape from the radiator shutter.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A000NB5

      Install a new radiator side air seal.


      1. Using a heat light, heat the radiator shutter.

      2. Remove the peeling paper from the face of the radiator side air seal.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the radiator side air seal.

        Tech Tips

        Press the radiator side air seal firmly to install it.

  2. INSTALL RADIATOR SIDE AIR SEAL RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL RADIATOR GRILLE SEAL

    Tech Tips

    When installing the radiator grille seal, heat the radiator shutter and radiator grille seal using a heat light.

    Standard
    Item Temperature
    Radiator Shutter 20 to 30°C (68 to 86°F)

    Note

    Do not heat the radiator shutter excessively.


    1. Clean the radiator shutter surface.


      1. Using a heat light, heat the radiator shutter surface.

      2. Remove the double-sided tape from the radiator shutter.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A000NRM

      Install a new radiator grille seal.


      1. Using a heat light, heat the radiator shutter.

      2. Remove the peeling paper from the face of the radiator grille seal.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the radiator grille seal.

        Tech Tips

        Press the radiator grille seal firmly to install it.

  4. INSTALL SWING GRILLE ACTUATOR ASSEMBLY


    1. A000P07

      Fully open the radiator shutter.

    2. Attach the 4 guides to install the swing grille actuator.

  5. INSTALL MOTOR COVER


    1. Attach the 2 guides and 4 claws to install the motor cover.