GRILLE SHUTTER REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  4. REMOVE FRONT BUMPER ENERGY ABSORBER

    Click here

  5. REMOVE ENGINE UNDER COVER

    Click here

  6. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A000T80

      Remove the 4 clips, 2 bolts.

    2. Detach the 2 claws and remove the radiator support opening cover.

  7. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY


    1. Close the radiator shutter sub-assembly.


      1. Connect the GTS to the DLC3 and turn the power switch on (IG).

      2. Enter the following menus: Body Electrical / Grille Shutter / Active Test / Shutter Closing Operation Lock Detection. Then, perform Close or OFF.

        Note

        The radiator shutter sub-assembly cannot be removed if it has not been closed.

      3. Check that the radiator shutter sub-assembly is closed and disconnect the radiator shutter sub-assembly connector.

      4. Turn the power switch off.

    2. A000POF

      Using a clip remover, detach the clamp and remove the thermistor.

    3. A000SI1

      Remove the 4 bolts.

    4. A000PWG

      Using a clip remover, detach the 2 clips and remove the radiator shutter.