FRONT BUMPER(for Sport Package) REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE FRONT BUMPER COVER


    1. A000OVZ

      Remove the 8 screws.

    2. A000OD7E09
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the 2 pin hold clips 90° and remove the pin hold clips and screw.

      Tech Tips

      Use the same procedure for the pin hold clips and screw on the other side.

    3. A000QR6

      Remove the 4 clips bolt.

    4. A000RYS

      Put protective tape around the front bumper cover.

      Text in Illustration
      B002BQR Protective Tape
    5. A000MTJ

      Detach the 10 claws and remove the front bumper cover.

    6. Disconnect the 2 fog light connectors.

    7. w/ Headlight Cleaner System:


      1. Disconnect the 2 headlight washer hoses and then drain the washer fluid.

        Tech Tips

        Use a container to collect the washer fluid.

    8. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the No. 4 engine room wire.

  4. REMOVE FRONT BUMPER ENERGY ABSORBER

    Click here

  5. REMOVE THERMISTOR ASSEMBLY

    Click here

  6. REMOVE ENGINE UNDER COVER (w/ Grille Shutter)

    Click here

  7. REMOVE RADIATOR SUPPORT OPENING COVER (w/ Grille Shutter)

    Click here

  8. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY (w/ Grille Shutter)

    Click here

  9. REMOVE VEHICLE APPROACHING SPEAKER ASSEMBLY

    Click here

  10. REMOVE FRONT BUMPER REINFORCEMENT

    Click here

  11. REMOVE FRONT BUMPER SIDE RETAINER LH

    Click here

  12. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  14. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Tech Tips

    Use the same procedure described for the LH side.