VEHICLE APPROACHING SPEAKER SWITCH INSPECTION

PROCEDURE


  1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (VEHICLE APPROACHING SPEAKER SWITCH)

    A000QZ0E08
    Text in Illustration
    *a

    Component without harness connected

    (Integration Control and Panel Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (B) - 2(ECU) Switch on 10 kΩ or higher
      Switch off Below 1 Ω

    2. Connect a battery positive (+) lead to terminal 3 (ILL+) and a negative (-) lead to terminal 6 (ILL-).

    3. Check that the headlight cleaner switch illumination comes on.

      OK
      The headlight cleaner switch illumination comes on.

      If the result is not as specified, replace the integration control and panel assembly.