ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. Attach the 11 clips to install the body rocker panel moulding LH.

    2. Install the 2 screws.

    3. Install the clip and 6 retainers.

    4. Install the 3 screws.

  2. INSTALL REAR ROCKER PANEL MOULDING END COVER LH

    Tech Tips

    Use the same procedure for both rear rocker panel moulding end covers.


    1. Attach the 2 claws to install the rear rocker panel moulding end cover LH.

  3. INSTALL REAR NO. 2 FLOOR HOUSING SHIELD


    1. Install the rear No. 2 floor housing shield with the clip and 2 screws.