ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR NO. 2 FLOOR HOUSING SHIELD


    1. A000PKH

      Remove the clip, 2 screws and rear No. 2 floor housing shield.

  2. REMOVE REAR ROCKER PANEL MOULDING END COVER LH

    Tech Tips

    Use the same procedure for both rear rocker panel moulding end covers.


    1. A000QOH

      Detach the 2 claws and remove the rear rocker panel moulding end cover LH.

  3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. Remove the 3 screws.

    2. Remove the clip and 6 retainers.

      A000RRO

    3. Put protective tape around the body rocker panel moulding LH.

      A000R0E
      Text in Illustration
      B002BQR Protective Tape - -

    4. Remove the 2 screws.

    5. Detach the 11 clips and remove the body rocker panel moulding LH.