TIRE PRESSURE WARNING INITIATOR(for Front Side) INSTALLATION

PROCEDURE

1. PRECAUTION

   CAUTION:

   Be sure to read Precaution thoroughly before servicing Click here.

2. INSTALL FRONT TIRE PRESSURE MONITOR INITIATOR

   
   

   1. Install the front tire pressure monitor initiator with the nut.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

   2. Connect the connector.

3. INSTALL FRONT FENDER LINER LH

   
   

   1. Install the front fender liner LH with the 12 screws and 9 clips.

4. INSTALL FRONT WHEEL LH

   Torque:

   103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

5. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here