TOE CONTROL LINK INSTALLATION

PROCEDURE


  1. TEMPORARILY INSTALL TOE CONTROL LINK SUB-ASSEMBLY


    1. A000SP0E01
      Text in Illustration
      *a Matchmark

      Install the toe control link and insert the toe adjust cam from the front of the vehicle. Then install the No. 2 toe adjust plate and temporarily install the nut.

      Note

      Align the matchmarks on the rear suspension member and rear No. 2 suspension toe adjust plate.

    2. Install the rear suspension toe control link with a new nut.

      Torque:
      70 N*m  { 714 kgf*cm, 52 ft.*lbf }

  2. STABILIZE SUSPENSION

    Click here

  3. TIGHTEN TOE CONTROL LINK SUB-ASSEMBLY


    1. Tighten the nut on the rear suspension member side.

      Torque:
      117 N*m  { 1193 kgf*cm, 86 ft.*lbf }

      Note

      Check that the matchmarks on the rear suspension member and rear No. 2 suspension toe adjust plate are aligned.

  4. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  5. INSPECT AND ADJUST REAR WHEEL ALIGNMENT

    Click here