REAR COIL SPRING REMOVAL

PROCEDURE

1. REMOVE REAR WHEEL

2. DISCONNECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   Click here

3. REMOVE REAR SUSPENSION ARM COVER

   Click here

4. DISCONNECT TOE CONTROL LINK SUB-ASSEMBLY (w/o DYNAMIC REAR STEERING)

   Click here

5. DISCONNECT REAR STEERING LINK ASSEMBLY (w/ DYNAMIC REAR STEERING)

   Click here

6. DISCONNECT REAR NO. 1 SUSPENSION ARM ASSEMBLY

   Click here

7. REMOVE REAR STABILIZER LINK ASSEMBLY

   Click here

8. DISCONNECT REAR SHOCK ABSORBER ASSEMBLY

   Click here

9. REMOVE REAR COIL SPRING

   
   

   1. Loosen the bolt and nut of the rear No. 2 suspension arm on the rear suspension member side.

   2. 

      Remove the bolt and nut located on the rear axle assembly of the rear No. 2 suspension arm.

      Note

      Hold the nut and remove the bolt.

   3. Lower the jack gradually to remove the rear coil spring with rear upper coil spring insulator.

   4. Remove the rear lower coil spring insulator from the rear No. 2 suspension arm.

10. REMOVE REAR UPPER SPRING SEAT

    
    

    1. 

       Remove the 3 bolts and rear upper spring seat from the vehicle.