FRONT UPPER SUSPENSION ARM INSTALLATION

PROCEDURE

1. INSTALL FRONT SUSPENSION UPPER ARM ASSEMBLY

   
   

   1. Install the front suspension upper arm with the 2 bolts.

      Torque:

      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

2. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

   Click here

3. INSTALL ABSORBER CONTROL ACTUATOR

   Click here

4. INSTALL UPPER SHOCK ABSORBER CAP

   Click here

5. CONNECT FRONT SUSPENSION UPPER ARM ASSEMBLY

   Click here

6. CONNECT SKID CONTROL SENSOR WIRE

   Click here

7. STABILIZE SUSPENSION

   Click here

8. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

   Click here

9. INSTALL FRONT WHEEL

   Click here

10. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    Click here