FRONT SHOCK ABSORBER DISPOSAL

PROCEDURE


  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY


    1. A000OWDE02
      Text in Illustration
      *a 30 mm (1.18 in.)

      Fully extend the front shock absorber rod.

    2. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.

      CAUTION:


      • Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.

      • The gas is colorless, odorless and non-poisonous.