SUSPENSION CONTROL ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the auxiliary battery negative (-) terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  6. REMOVE FRONT DOOR OPENING TRIM COVER RH

    Click here

  7. REMOVE ABSORBER CONTROL ECU


    1. Fold back the floor carpet.

    2. Disconnect the 3 connectors.

    3. A000NB6

      Remove the bolt, nut and absorber control ECU.

      Note

      Do not drop the absorber control ECU. If it is dropped, replace it with a new one.