ADAPTIVE VARIABLE SUSPENSION SYSTEM DIAGNOSIS SYSTEM


  1. DIAGNOSIS SYSTEM


    1. DTCs (normal mode)


      1. DTCs are stored in the absorber control ECU and output by using the GTS. Refer to the DTC check procedure Click here.

    2. Test mode


      1. By switching from normal mode to test mode, it is possible to inspect the front acceleration sensor and rear acceleration sensor Click here.

  2. CHECK INDICATOR LIGHT


    1. Turn the power switch on (IG).

    2. Check that the "SPORT S+" indicator in the multi-information display is displayed for approximately 1.5 seconds after the combination meter initialization.

      If the indicator check result is not normal, proceed to troubleshooting for the indicator Click here.