ADAPTIVE VARIABLE SUSPENSION SYSTEM TERMINALS OF ECU


  1. CHECK ABSORBER CONTROL ECU

    B002B8KE02
    Text in Illustration
    *a

    Component with harness connected

    (Absorber Control ECU)

    		 - -

    Tech Tips


    • Inspect the connectors from the back side while the connectors are connected.

    • Check the operation of a particular valve by listening for operating sounds or by using the Data List.

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    A37-9 (SGB1) - Body ground R Front acceleration sensor LH power source Power switch on (IG) 4.75 to 5.25 V
    A37-10 (SGG1) - Body ground BR Front acceleration sensor LH ground Always Below 1 Ω
    A37-18 (SGS1) - Body ground LG Front acceleration sensor LH Power switch on (IG) 0 to 5 V
    N105-3 (B) - Body ground B IG power supply Power switch on (IG) 11 to 14 V
    N105-5 (GND) - Body ground W-B Ground Always Below 1 Ω
    N105-7 (CANH) - N105-8 (CANL) V - LG CAN communication line Power switch off 54 to 69 Ω
    N105-16 (SGG2) - Body ground LG Rear acceleration sensor ground Always Below 1 Ω
    N105-17 (SGB2) - Body ground BR Rear acceleration sensor power source Power switch on (IG) 4.75 to 5.25 V
    N105-20 (CA2H) - N105-21 (CA2L) W - SB CAN communication line Power switch off 54 to 69 Ω
    N105-26 (SGS2) - Body ground B Rear acceleration sensor Power switch on (IG) 0 to 5 V