REAR DIFFERENTIAL CARRIER OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  2. REMOVE REAR DIFFERENTIAL CARRIER COVER

    Click here

  3. SECURE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  4. REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

    Click here

  5. REMOVE REAR DIFFERENTIAL SIDE GEAR SHAFT SNAP RING

    Click here

  6. REMOVE REAR DIFFERENTIAL CASE BEARING

    Click here

  7. REMOVE REAR DIFFERENTIAL CASE SUB-ASSEMBLY

    Click here

  8. REMOVE REAR DRIVE PINION NUT

    Click here

  9. REMOVE REAR DRIVE PINION COMPANION FLANGE

    Click here

  10. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL


    1. A000PMQE02
      Text in Illustration
      *1 Rear Differential Carrier Oil Seal

      Using SST, remove the rear differential carrier oil seal from the rear differential carrier.

      SST
      09308-00010

  11. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

    Click here

  12. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING


    1. A000SLI

      Remove the rear drive pinion front tapered roller bearing inner race from the rear differential carrier.

  13. REMOVE DIFFERENTIAL DRIVE PINION

    Click here

  14. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER

    Click here

  15. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER

    Click here

  16. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING

    Click here

  17. INSTALL DIFFERENTIAL DRIVE PINION

    Click here

  18. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER

    Click here

  19. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL


    1. A000R36E03
      Text in Illustration
      *1 Rear Differential Carrier Oil Seal

      Using SST and a hammer, install a new rear differential carrier oil seal.

      SST
      09316-60011   ( 09316-00011 )
      09710-30012   ( 09710-04101 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

      Note


      • Tap the oil seal uniformly so that the oil seal is straight.

      • Do not excessively tap the oil seal.

  20. INSTALL REAR DRIVE PINION COMPANION FLANGE

    Click here

  21. INSTALL REAR DIFFERENTIAL CASE SUB-ASSEMBLY

    Click here

  22. INSTALL REAR DIFFERENTIAL CASE BEARING

    Click here

  23. INSTALL REAR DIFFERENTIAL SIDE GEAR SHAFT SNAP RING

    Click here

  24. ADJUST DIFFERENTIAL DRIVE PINION PRELOAD

    Click here

  25. INSPECT TOTAL PRELOAD

    Click here

  26. STAKE REAR DRIVE PINION NUT

    Click here

  27. INSTALL REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

    Click here

  28. INSTALL REAR DIFFERENTIAL CARRIER COVER

    Click here

  29. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here