FRONT ACCELERATION SENSOR(for RHD) REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  2. REMOVE FRONT DOOR OPENING TRIM COVER LH

    Click here

  3. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  8. REMOVE ACCELERATION SENSOR ASSEMBLY


    1. Fold back the floor carpet.

    2. A000R46

      Disconnect the connector.

    3. Remove the 2 nuts and front acceleration sensor assembly.

  9. REMOVE ACCELERATION SENSOR BRACKET


    1. A000QH5

      Detach the clip and disconnect the connector holder.

    2. A000SQR

      Remove the bolt, nut and acceleration sensor bracket.