KICK-DOWN SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL KICK DOWN SWITCH ASSEMBLY


    1. for LHD:

      Install the kick down switch assembly with the 2 bolts and nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. for RHD:

      Install the kick down switch assembly with the bolt and 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the kick down switch connector.

  2. INSTALL NO. 3 DASH PANEL INSULATOR PAD

  3. INSTALL ACCELERATOR PEDAL

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  6. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  7. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here