SHIFT LEVER POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT SUSPENSION MEMBER BRACE

    Click here

  2. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  3. REMOVE SHIFT LEVER POSITION SENSOR


    1. A000OLU

      Disconnect the shift lever position sensor connector.

    2. A000OJT

      Remove the nut, spring washer and transmission control shaft lever with the floor shift gear shifting rod sub-assembly from the shift lever position sensor.

    3. A000RXYE02
      Text in Illustration
      *1 Lock Plate
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, pry out the lock plate.

    4. Remove the lock nut and lock plate from the shift lever position sensor.

    5. A000OP5

      Remove the 2 bolts and shift lever position sensor from the hybrid vehicle transmission assembly.

      Tech Tips

      Make sure that the manual shaft has not been rotated prior to installing the shift lever position sensor as the detent spring may become detached from the manual shaft.