MOTOR CABLE REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

The engine assembly with hybrid vehicle transmission assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the engine lifter may suddenly drop.

PROCEDURE


  1. PRECAUTION

    Click here

  2. REMOVE ENGINE WITH TRANSMISSION

    Click here.

  3. REMOVE MOTOR CABLE

    CAUTION:

    Wear insulated gloves.

    Note


    • Cover the hole where the motor cable was connected with tape or equivalent (nonresidue type) to prevent entry of foreign matter.

    • Insulate the removed terminals with insulating tape.

    • When removing the motor cable, make sure not to bend the motor cable base on the hybrid vehicle transmission assembly side.


    1. Release the motor cable side lock of the wiring harness clamp to disconnect the motor cable from the wiring harness clamp as shown in the illustration.

      A000Q7LE02
      Text in Illustration
      *A for LHD *B for RHD
      *1 Wiring Harness Clamp - -
      *a Matchmark - -

      Tech Tips

      Place a matchmark on the motor cable before disconnecting the motor cable from the wiring harness clamp.

    2. Disconnect the 2 clamps from the engine assembly and hybrid vehicle transmission assembly.

    3. A000OHQ

      Using an insulated tool, remove the 2 bolts and connector cover from the motor cable and hybrid vehicle transmission assembly.

    4. A000S4K

      Disengage the 2 claws to remove the terminal cap from the hybrid vehicle transmission assembly.

    5. A000SDO

      Using an insulated tool, remove the 5 bolts and motor cable from the hybrid vehicle transmission assembly.